Have above car with code- P100C Pedal Pos. Track 1 Memory
Have done throttle pos track test with V30 and get different voltage readings from both tracks
Accelerator pedal position 42.7 %
Pedal sensor track 1 voltage 2.31 V
Pedal sensor track 2 voltage 1.00 V
Anybody- does that look acceptable?
(ohms track tests(both tracks ok)
yes, from memory they should read differently and move in different directions...IE 1-5 V, 5v to 1V. Do they alter as you push the pedal? The position 42.7% looks high?
These had a recall a while back on these relating to the wiring loom from pedal to actuator, cure was a modified loom although dealers always seemed to fit pedal, throttle actuator and loom to be sure...
Thanks for that Andrew,
I recently fitted a new egr valve to this vehicle & upon googling egr faults- a few people on there say that a new egr valve needs adaption !
Is this possible with V30 & if so where is it on the menu ?
( have done vw.s with v30- so know they can be done)
Many thanks
Hi Andrew,
Thanks for your help (worked a treat)
Just for Ref-
You have to select Clio 2007 Onward (Even tho its a 2004 car)
Also its listed as AGR valve adaptions (Not EGR) !
Perhaps on your next update you can alter as necessary ?
Thanks once again